PERENCANAAN GEDUNG MESS 5 LANTAI PEKERJA PABRIK PT. PARKLAND WORLD INDONESIA (PWI) DI MAYONG JEPARA.

  • Hendryk Ratna Prasetya Program Studi Teknik Sipil Universitas Islam Nahdlatul Ulama Jepara
  • Nor Hidayati Program Studi Teknik Sipil Universitas Islam Nahdlatul Ulama Jepara
  • Decky Rochmanto Program Studi Teknik Sipil Universitas Islam Nahdlatul Ulama Jepara

Abstract

The development of the industrial revolution has an impact on economic growth that is increasingly evenly distributed throughout Indonesia, not least in Jepara Regency, especially in industrial areas that have been provided by the government, but the limited land available has an impact on the increasing number of tall buildings being built to support housing needs in the surrounding area.
In the construction of multi-storey buildings, careful planning is needed so that the building structure is able to stand strong, withstand earthquakes, be efficient and meet SNI. Careful planning will avoid the occurrence of building failures or unwanted construction failures.
In this final project the building being reviewed is a 5-story building which is a 5-story mess building for factory workers of PT. Parkland World Indonesia in Mayong Jepara, The calculation of the structure of the building is reviewed against dead loads, live loads and earthquake loads using SAP 2000. The calculations include roofs, plates, beams, columns, and foundations. The planning location of the building is on Jl. Raya Jepara - Kudus, Pelang, Kec. Mayong, Jepara Regency, Central Java
From the planning obtained a concrete structure with a thickness of 120 mm 12 - 200 slab, beam 400 x 800 mm 9 D19, 300 x 600 mm 8 D12, 200 x 400 mm 7 D12. column 500 x 750 mm 12 D19, and 500 x 500 mm 8 D19, with concrete quality (f'c) = 30 MPa, deform reinforcement quality (fy) = 400 MPa and plain reinforcement quality (fy) = 240 MPa. the roof structure uses double angel steel truss 2L.40.40.3 and 2L.30.30.3, the lower structure uses 6 m long piles with a diameter of 40 cm.

References

L. Ferayuansa, “Perencanaan Gedung Kuliah 5 Lantai Dengan Sistem Rangka Pemikul Momen Menengah Di Wilayah Surakarta,” 2017.

wahyu putra Ramadhan, “Perencanaan Struktur Bangunan Berlantai Tujuh Gedung Serbaguna Yayasan Unisnu Jepara Dengan Konstruksi Beton Bertulang,” 2019.

Badan Standardisasi Indonesia, “Tata cara perhitungan struktur beton untuk gedung. SKSNI-T-15-1991-03,” SKSNI-T-15-1991-03, 1991.

Badan Standardisasi Nasional, “Tata cara perencanaan gempa untuk struktur gedung dan non gedung : SNI-1726 : 2012.,” Rethink. Marx., vol. 15, no. 3, pp. 316–325, 2003, doi: 10.1080/0893569032000131613.

A. P. Wibowo, “PERENCANAAN STRUKTUR GEDUNG BETON BERTULANG DENGAN SISTEM RANGKA PEMIKUL MOMEN KHUSUS (SRPMK) DAN SISTEM RANGKA PEMIKUL MOMEN MENENGAH (SRPMM) Studi Kasus : Rusunawa 2 Twin Blok Pringwulung Sleman Yogyakarta,” vol. 66, pp. 37–39, 2012.

Badan Standardisasi Nasional, “Tata Cara Perhitungan Struktur Beton Untuk Bangunan Gedung. SNI 03-2847: 2002,” Bandung Badan Stand. Nas., p. 251, 2002.

A. Kustrini, “ANALISIS STRUKTUR ATAP BAJA DOUBLE SIKU Kehadiran baja di Indonesia merupakan sebuah inovasi dalam pembuatan rangka kuda-kuda pada bangunan . Pemakaian material baja double siku dalam proyek-proyek gedung sudah tidak asing lagi . Dalam pengaplikasiannya d,” pp. 19–26, 2020.

Departemen Pekerjaan Umum, “Peraturan Pembebanan Indonesia Untuk Gedung (PPIUG). Direktorat Yayasan Penerbit PU, 1987.” 1987.

H. Husnah, N. E. Darfia, and F. Hidayat, “Analisis Struktur Rangka Baja Ringan Dan Baja Berat (Wf) Dengan Metode Bricscad Dan Metode Elemen Hingga,” Siklus J. Tek. Sipil, vol. 5, no. 2, pp. 87–96, 2019, doi: 10.31849/siklus.v5i2.3232.

felix bram Samora, “PERANCANGAN STRUKTUR GEDUNG RUSUNAWA 5 LANTAI DI WILAYAH GEMPA 3,” Pap. Knowl. . Towar. a Media Hist. Doc., vol. 3, no. April, pp. 49–58, 2015.

Badan Standardisasi Nasional, “Beban Minimum untuk Perancangan Bangunan Gedung dan Struktur Lain SNI 1727 : 2013,” Beban Minim. untuk Peranc. Bangunan Gedung dan Strukt. Lain, p. 196, 2013, [Online]. Available: www.bsn.go.id

N. Hidayati and H. Yustianingsih, “Studi Analisa Pengaruh Dimensi Kolom Pada Infrastruktur Strong Column Weak Beam Gedung Lantai 3 - Lantai 7 Akibat Gaya Gempa,” Rev. Civ. Eng., vol. 3, no. 2, pp. 51–56, 2019, doi: 10.31002/rice.v3i2.1713.

Published
2023-10-31